– Install supporting device - MP9-200 (10-222A)- . For this pur‐
pose, position the supports -C- next to the screw -arrow 1- and
the support for the engine hood -arrow 2- as shown.
– Hook the original spindle -A- into the front right engine lifting
eye.
– Position the shortened spindle -B- on the adapter - 10-222 A/
3- .
– Hook the rear left shackle - 10-222 A/12- into the engine lifting
eye.
Caution
The vacuum hose must move freely in the lifting eye
-arrows-.
It must not be damaged.
– Then connect the shackle - 10-222 A/12- with the shortened
Supporting device for vehicles Rapid NH
– Remove wiper arms ⇒ Electrical System; Rep. gr. 92 .
– Remove the cooling water tank cover ⇒ Body Work; Rep. gr.
66 .
– Remove plastic covers for upper shock absorber mounting.
– Install supporting device - T30099- with base - T30099/1- and
hook for MP9-200 and T30099 - MP9-200/10- .
Note
Support supporting device - T30099- with base - T30099/1- and
lock carrier.
Continued for all vehicles
– Take up the weight of the engine/gearbox unit at the spindle.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
2. Removing and installing the gearbox
103
