Oil filler plug or oil drain plug with hexagon socket head - 32 Nm
7 - O-ring
❑ only on vehicles without ABS
❑ always replace ⇒ Electronic Catalogue of Original Parts
8 - Speedometer sender -G22-
❑ only on vehicles without ABS
9 - 5 Nm + 90° further
❑ only on vehicles without ABS
❑ always replace ⇒ Electronic Catalogue of Original Parts
10 - Adjusting washer S2
❑ for differential gear
❑ Determine thickness
11 - Outer ring/tapered-roller bearing
❑ for differential gear
❑ removing and installing
❑ if the bearing is replaced, set the differential gear
12 - 5 Nm + 90° further
❑ always replace ⇒ Electronic Catalogue of Original Parts
13 - Outer ring/tapered-roller bearing
❑ for differential gear
❑ removing and installing
❑ if the bearing is replaced, set the differential gear
14 - Adjusting washer S1
❑ for differential gear
❑ always 1 mm thick
❑ on gearboxes made out of aluminium as of production date 12.06 the adjusting washer S1 for outer ring/
tapered-roller bearing is not fitted
❑ Bearing pedestal for outer ring/tapered-roller bearing is adapted
❑ Assignment ⇒ Electronic Catalogue of Original Parts
15 - Fitting sleeve
❑ (2 pieces)
16 - Gearbox housing
❑ is made out of aluminium or magnesium
❑ when used: Adjusting differential gear
❑ on gearboxes made out of aluminium as of production date 12.06 the adjusting washer S1 (-Pos.14-) for
outer ring/tapered-roller bearing is not fitted
❑ Bearing pedestal for outer ring/tapered-roller bearing is adapted
❑ Assignment ⇒ Electronic Catalogue of Original Parts
17 - Oil drain plug
Oil filler plug or oil drain plug with internal serration - 24 Nm
Oil filler plug or oil drain plug with hexagon socket head - 32 Nm
18 - Sealing ring
❑ for left flange shaft
❑ replace
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
5. Repairing gearbox housing and clutch housing
127
