– The support -2- must be located on the actuating rod -1- of the
master cylinder.
– Press the support -2- into the recess on the clutch pedal -3-
until it clicks audibly into place.
– Insert the over-centre helper spring laterally from the bottom
into the support -A- in the bracket next to the tappet of the
master cylinder and next to the clutch pedal.
• The area of the support -arrow- for the bearing bolt of the clutch
pedal must be vertical.
– Now position the over-centre helper spring on the centering
pin of the clutch pedal -arrow-.
– Press on the clutch pedal slightly and insert a new bearing bolt.
– Position the bolts -A- horizontally.
– Turn the bearing bolt to the right -in direction of arrow-, for this
purpose use the hexagon socket wrench -1-, wrench size
8 mm.
• The catches -B- must click audibly into place.
Then the bolts -A- are positioned vertically.
– Install the clutch pedal switch - F36-
.
– If present, install the crash strut
.
– Install the footwell vent ⇒ Heating and Air Conditioning; Rep.
gr. 87 .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
47
