– Lever off the collar frame with the disassembly wedge -
T30098- out of the surround for the centre console in
-direction of arrow-.
– For this step, press on the frame -arrows- and at the same time
raise the frame.
– Lift off the frame.
– Pull the collar upwards over the gearshift knob.
– Turn securing mechanism -arrow A- in -direction of arrow B-
and pull off gearshift knob together with the collar.
Install
– Turn collar inside out.
– Position the gearshift knob together with the collar and secure
with securing mechanism -arrow A- against the
-direction arrow B-.
When inserting the gearshift knob on the shift lever the gearshift
knob must lock into the round slot of the gearshift lever.
– Fit the frame with its catch pegs into the rear part of the centre
console.
– Lock the frame into the cover of the centre console in the front
part.
1.6
Remove and install gearshift knob and
shift lever collar (Rapid NH)
Special tools and workshop equipment required
♦ Release tool - T30098-
♦ Hose strap pliers , e.g. -V.A.G 1275 A-
– Lever the collar frame out of the centre console. To do so, fit
the release tool - T30098- between the collar frame and the
cover of the centre console in the middle of the front side
-arrow 1- and press it forwards in -direction of arrow 2-.
– Lift off the frame.
– Pull the collar upwards over the gearshift knob.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
1. Shift mechanism
81
