– Remove the earth strap from the engine/gearbox connecting
screw -1- (on certain types of engines the earth strap is not
connected).
– Unplug connector -2-.
– Remove the earth strap for starter -3-.
– Lay aside all electrical cables.
– Remove engine/gearbox connecting screws at the top.
– Remove fixing screw for starter at the top.
Supporting devices for vehicles with 1.2/63; 77 kW TFSI engines
– Install supporting device - MP9-200 (10-222A)- ⇒ Engine;
Rep. gr. 15 .
Supporting device for vehicles with engines with both engine lift‐
ing eyes at the front
– Install supporting device - MP9-200 (10-222A)- with adapter -
MP9-200/3 (10-222A/3)- .
Note
When installing the lifting hooks of the supporting device, pay at‐
tention to hose and cable connections in the area of the lifting
eyes of the engine to avoid damaging them.
Supporting devices for vehicles (one front engine lifting eye, one
rear engine lifting eye)
Shorten the original spindle -I- of the supporting device - MP9-200
(10-222A)- by 100 mm:
I - Original spindle
♦ Dimension -a- = 442 mm
♦ Dimension -x- = 100 mm
II - shortened spindle MP9-200/10 (10-222A/10)
♦ Dimension -b- = 342 mm
Note
In order for the original spindle -I- of the supporting device -
MP9-200 (10-222A)- not to touch the engine hood, it must be
shortened to the dimension -x- (100 mm).
– If hose and cable connections are located in the area of the
engine lifting eye for the supporting device - MP9-200
(10-222A)- , these must now be removed.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
102
