The LEAVING HOME function switches on the light
when unlocking the vehicle with the wireless remote
control.
Operating conditions
✓
Visibility has worsened.
✓
The light switch is located in mode
.
Settings
This function is set as follows in the Infotainment
system.
›
Outside .
›
By moving your finger sideways, choose the screen
with the menu item Comfort light .
›
Select Comfort light and accept the settings for the
functions.
After switching off the ignition, a menu is dis-
played on the Infotainment screen, showing where
the COMING HOME function can be activated/deac-
tivated.
Light Assist high-beam assist system
Functionality
The high beam assist system automatically switches
the high beam on and off.
WARNING
Risk of accident!
▶
If necessary, manually switch the high beam on or
off.
Operating conditions
✓
The system is activated.
✓
The light switch is located in mode
.
✓
The driving speed is higher than 30 km/h (for
some countries, higher than 60 km/h).
✓
The low beam is switched on.
Operation
Switching on
›
Push the lever in the
direction of the arrow.
It lights up in the instru-
ment cluster
from
the isolation box.
Switching off
›
Manually switch the high beam on or off.
Function restriction
The system may dazzle other road users if their
headlights/lights are not detected for the following
reasons, for example.
▶
The headlights/lights of oncoming vehicles are
covered by crash barriers, for example.
▶
The headlamps/lights of the oncoming or preced-
ing vehicle are dirty or not functioning.
Settings
Activation/deactivation
The function is activated or deactivated as follows in
the Infotainment system.
›
Outside .
›
By moving your finger sideways, choose the screen
with the menu item Headlights .
›
Select Headlights and actiavte or deactivate the func-
tion Light Assist .
Dynamic Light Assist headlight assist
system
Functionality
The headlight assist system automatically switches
the high beam on and off.
When the high beam is switched on, it adjusts the
light cone so that the drivers of oncoming and pre-
ceding vehicles are not dazzled.
WARNING
Risk of accident!
▶
If necessary, manually switch the high beam on or
off.
Operating conditions
✓
The system is activated.
✓
The light switch is located in mode
.
✓
The driving speed is higher than 30 km/h (for
some countries, higher than 60 km/h).
✓
The low beam is switched on.
52 Lighting, windscreen wipers and washers ›
Light Assist high-beam assist system