12
Servicing
User Manual
SKOPE B1200-2/B1200G-2
3
Servicing
Isolating Electrics
You should isolate the cabinet from the power supply before attempting
any
maintenance. Use the isolating switch to turn off electrics to the cabinet and
refrigeration unit without unplugging the cabinet from the wall. The isolating
switch is located on the right hand side of the refrigeration unit compartment.
To isolate the power supply
Cleaning
Cabinet
Periodically wipe the inside and outside of the cabinet with a damp cloth,
taking care to keep moisture away from electrical parts. As with any
maintenance, ensure the cabinet is isolated from the power supply before
cleaning.
Condenser
Coil
To ensure trouble-free performance, we strongly urge monthly cleaning with
a soft brush to remove dust and fluff. A more thorough cleaning is
recommended every six months, by qualified service personnel. The
condenser coil
must
be kept clean for efficient and reliable operation.
To clean the condenser coil
1. Fully open the cabinet doors and unscrew the front panel.
2. Remove the front panel
from the cabinet.
3. Turn off the power to the
cabinet (0) at the isolating
switch.
WARNING
Isolate the cabinet from the power supply before cleaning the
condenser coil.
1. Remove the front panel and isolate the chiller from the mains power supply
(see above).
2. Clean the condenser coil
with a soft brush.
3. Reconnect the chiller to the power supply and refit the front panel.
