46
Replacement Procedures
Service Manual
SKOPE BackBar X
Refrigeration
Unit Removal
Follow the steps below to remove the refrigeration unit from the cabinet.
To remove the refrigeration unit from cabinet
1. Remove the unit cover, switch off (O) the isolation switch and unplug the
power plug from the isolation box.
2. Unplug the yellow cabinet supply plug from the electrics box.
3. Detach the electronic
controller from the unit
cover. To do this, grasp
with your thumb over the
top and fingers wrapped
around, and push the
back of the assembly
down firmly to unclip.
4. Unscrew and withdraw the evaporator support bracket, and slide the
evaporator box out from the cabinet port hole.
5. Slide the unit out from the cabinet.
Isolation box
Evaporator support bracket
Electrics box
Unit cover (removed)
Electronic controller (detached)
Evaporator box
Cabinet supply plug (yellow)
Power plug (unplugged)
