7
SKOPE B550/660-2 and BME550-2
Installation
User Manual
Fitting the Shelves
Depending on the model, the chiller is supplied with four or five wire shelves
which may be positioned at different heights to suit various products. Each
shelf is held in place with eight shelf clips, which engage in the shelf support
strips. The support strips are marked with a ‘+’ for easy location of shelf clips.
To fit the cabinet shelves
1. Unpack the wire shelves and shelf clips from inside the cabinet.
2. Establish the desired position for the shelves and securely engage a
shelf clip in each of the shelf support strips (see Figure 6 below).
3. Sit the shelves onto the shelf support clips.
•
Remove some product if the shelves are flexing or bending.
Figure 4: Sign Retaining Clip
Figure 5: Sign Back Panel
Sign Retaining Clip
Sign Side Panel
Sign Back
Panel
Figure 6:
Shelf Clip
Shelf Support Strip
Shelf Clip
‘+’ Mark
Shelf
