10
SKOPE Remote Glass Chiller – GC110r
Electronic Controller
SKOPE GC110r
Alarms
Control probe error.
Condenser probe error.
Evaporator probe error.
Low temperature alarm. An alarm sounds. The temperature inside the chiller is too cold. The controller will
automatically reset the alarm once the temperature inside the chiller rises.
High temperature alarm. An alarm sounds. The temperature inside the chiller is too warm. The controller will
automatically reset the alarm once the temperature inside the chiller drops.
Refrigeration system high temperature
Pre-warning (auto reset)
1. Check refrigeration ventilation and ensure the cabinet is
installed in a suitable location (see page 5).
2. To reset the ‘CHt’ alarm - unplug the cabinet from the power
supply for 1 minute, then reconnect to power supply.
Refrigeration system high temperature
Shutdown (manual reset)
Low voltage alarm. An alarm sounds. The mains voltage is low. The controller switches the compressor off. The
controller will automatically reset the alarm once the mains voltage rises.
High voltage alarm. An alarm sounds. The mains voltage is high. The controller switches the compressor off. The
controller will automatically reset the alarm once the mains voltage drops.
Electronic controller fault.
