4
SKOPE Remote Glass Chiller – GC110r
Installation
SKOPE GC110r
Installation
Safety Information
When using any electrical appliance, safety precautions should always be observed.
Read these instructions carefully and retain for future reference.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
• Do not use this appliance for other than its intended use.
• Do not insert fingers/foreign objects into any holes.
• Only use this appliance with the voltage specified on the cabinet rating label.
• Ensure the appliance has adequate ventilation as this is essential to economical,
high performance.
• Be careful not to touch moving parts and hot surfaces.
• For your own safety and that of others, ensure that all electrical work is done by
authorised personnel.
• If the power supply flexible cord becomes damaged, it must be replaced by an
authorised service agent or similarly qualified person in order to avoid a hazard.
• If installing or removing the refrigeration unit, refer to the Installation Guidelines
below, and observe all necessary safety precautions.
• The appliance is not designed to be stable while in motion. Use extreme caution
when moving or transporting it.
• Do not store explosive substances such as aerosol cans with a flammable propellant
in this appliance.
• If the cabinet is to be scrapped, ensure the cabinet is unplugged from the power
supply and cut off the mains flex close to the back of the cabinet. Be mindful of the
risk of animals or children becoming trapped in the appliance – either remove or
secure doors if necessary.
• Refrigerant must be removed by a qualified service person and the cabinet recycled/
disposed of in accordance with local regulations.
Function
The SKOPE Remote Glass Chiller is designed to chill glasses. The chiller can hold three
standard 14” wide x 17” deep (355 mm x 432 mm) glass racks. The racks of glasses (not
included with the cabinet) are loaded from the front of the cabinet by opening the glass
door. The chilled glasses can then be accessed from the top of the cabinet after
removing the acrylic lid. For efficient operation of the chiller, the removable acrylic lid
should be replaced when not in use.
Caution
Disconnect the cabinet from the mains power supply before attempting any
cleaning or maintenance.
