18
Replacement Procedures
Service Manual
SERENE SC112G
5
Replacement Procedures
Shelves
Adjusting the
Shelves
The chiller is supplied with three wire shelves which may be positioned at
different heights to suit various products. Each shelf is held in place with four
shelf clips which engage in the corner shelf support strips.
To adjust the cabinet shelves
1. Remove the shelves from the chiller.
2. Remove the shelf clips from the four shelf support strips at each corner of the
chiller interior.
3. Establish the desired position for the shelves and securely engage a shelf clip
in each of the shelf support strips.
4. Sit the shelves onto the shelf support clips.
Shelf clip
Shelf support strip
Shelf
Figure 2: Shelf detail
