8
Installation
User Manual
SKOPE OD460
Optional
Gravity Shelf
System
When the chiller is ordered with the optional gravity feed matting, each shelf
is supplied with corresponding gravity feed matting and shelf dividers. The
gravity shelf system comes in three sizes to suit the three different size
shelves.
To fit the gravity feed matting and shelf dividers
1. Match up the shelf dividers with the corresponding mats.
2. Starting from the LH or RH side of the mat, fit the LH or RH end divider into
the end row of slots.
3. Work across the matting and fit the centre dividers at required intervals, then
fit the opposite end divider.
4. Slide the ticket strip across the front of the mat.
5. Place the mat and dividers onto the corresponding shelf inside the chiller.
6. Repeat for the remaining shelves.
