22
Replacement Procedures
Service Manual
SERENE SC112N-A
Bottom Sign
Lights
The chiller has two bottom lit signs, one at the front and one at the back.
Each sign is lit by one LED strip light (see page 17 for spare parts).
To replace a bottom sign light
1. Isolate the chiller from the power supply by unplugging from the wall socket.
2. Remove the lower bottom
panel by undoing the three
fixing screws, and remove
the sign panel and decal
out from the sign.
3. Unplug and unclip the
LED strip light, and
remove from the chiller.
4. Fit the new light and plug into the circuit. Reassemble and test.
