DOL 635 • DOL 639
22
User Manual
3.10 Password
This section is only relevant to houses where the Password function is activated.
The controller can be protected against unauthorized operation with the use of passwords. This function can be
activated in the menu
|
Management | Use password
.
In order to gain access to changing a setting, you must enter a password that corresponds to the user level
where the relevant function is located (Daily, Advanced and Service).
Enter the code.
After entering the password, the controller can be operated at
the corresponding user level. After 10 minutes without opera-
tion, the user is automatically logged off.
Select a page after operation. After 1 minute, the controller will
need the password entered again.
Activate the function
Use password for technical menu only
to make the controller require the
Service
password only when the user wants to change settings in the menus
Installation
,
Calibration
and
Ser-
vice
.
You can change the password for each of the three user levels in the menu
|
Management | Password
.
In order to gain access to changing a password, you must first enter the valid password.
User level
Gives access to
Factory-set code
Daily view
(without login)
Entering the number of animals
Fine-tuning of temperature, humidity and air quality
Daily
Daily:
Changing of set values
1111
Advanced
Daily + advanced:
Changing of curves and alarm settings
Set the house controller in manual mode
2222
Service
Daily + ad service:
Changing of settings under Technical menu
3333
