DOL 635 • DOL 639
34
User Manual
Silo delivery
Upon delivery of feed, the quantity supplied must be entered into the production
controller.
Silo delivery log
Delivery log with the amount and date for each delivery of feed. Up to twenty de-
liveries for each silo can be stored.
Silo selected
When the same type of feed in several silos is used, you can program which silo
the feed is to be taken from. The change comes into effect as soon as the setting
has been changed.
Silo Y has been selected:
The feed is taken from this silo.
Select silo X:
Change over to feed from this silo.
Silo 1 estimated time to
empty
The number of days until the silo is empty is calculated based on the last 24 hours
of feed consumption.
Graphic display of silo state
Silo cards can be added to a card and graphically displays the
current content in the silo. See also the
section.
Green
More than 50% of the capacity
Yellow
Less than 50% of the capacity
Red
Below level for silo alarm. See also the description of silo content under feed
alarms.
Symbol for shared silo.
Symbol for selected/active silo.
Symbol for silo delivery.
4.7.1 Silo empty sensor
When a silo empty sensor is used, the production controller stops the silo auger when the sensor registers that
there is no more feed in the silo.
