background image

Page 4 of 4 

Lights on CK-1 Box. 

When you place a line on HOLD, the corresponding LED on the rear of the CK-1A7 box 
lights up to confirm the Promotion-On-Hold condition. When the CK-1A7 is plugged 
into power, these lights will flash three times then will go out. 
 

Using Other Phones with the TL86109 phone 

 This AT&T phone system can be used with other makes and models of phones, but when 
the other phones are placed ON HOLD, the caller will not hear Music On Hold.   
 

Tech Support - 916-786-6186 

If you have any problems getting the unit to work properly feel free to give us a call.  
Technical Support is available between the hours of 7:30 AM and 4:30 PM Pacific Time, 
Monday through Friday.  
 

 

ONE YEAR LIMITED WARRANTY 

This SKUTCH PRODUCT is warranted against defects for a period of one (1) year from the date of the 
original invoice.  Within this period, we will repair it without charge for parts and labor.  To obtain 
warranty service the product must be returned, at the customer's expense, to SKUTCH Electronics along 
with a copy of the original invoice.  After the unit has been repaired, SKUTCH will ship the PRODUCT 
back via UPS GROUND service at our expense, only within the Continental United States .  If any other 
form of return shipment is requested, the customer will pay for 100% of the shipping cost. 
This Warranty does not apply if in the sole opinion of SKUTCH Electronics, the PRODUCT has been 
damaged by lightning or any other Acts of God, or by accident, misuse, neglect, or improper packing, 
shipping, modification or servicing by other than an authorized SKUTCH Service Center. 
EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER 
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 
WARRANTIES OR MERCHANTABILITIES OR FITNESS FOR A PARTICULAR PURPOSE AND IN 
NO EVENT SHALL SKUTCH ELECTRONICS BE LIABLE FOR LOSS OF PROFITS OR BENEFITS, 
INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR DAMAGES ARISING OUT OF 
ANY BREACH OF THIS WARRANTY OR OTHERWISE. 

Summary of Contents for CK-1A7

Page 1: ... phone The CK 1A7 ONLY works with this phone model The CK 1A7 is a true plug and play device This unit requires an external sound source such as a CD or Digital Player to provide the Promotion On Hold audio When a call is placed ON HOLD from the base or any of it s cordless phones the ON HOLD caller will hear the Promotion On Hold audio When the line is re answered the audio automatically stops It...

Page 2: ...de SENSOR board snug against corner of phone as shown in Fig 2 The Sensor Board MUST completely cover the line selector buttons on the phone Once you are SURE it is aligned correctly press down firmly to adhere to phone CAUTION The SENSOR BOARD must be aligned correctly or the unit will not operate If you need to remove the SENSOR BOARD once it is attached slowly lift up on one edge of the SENSOR ...

Page 3: ...t the POWER CUBE from the CK 1 box to 115VAC power Testing the System 1 Pickup line 1 on your telephone The line one Green LED on the SENSOR BOARD should light up Repeat this test for line 2 2 If both lines light up when picked up the CK 1 is working properly If the lights on the SENSOR BOARD do not light up then a Make sure that the CK 1 and Phone is connected to power b Make sure that the SENSOR...

Page 4: ...d labor To obtain warranty service the product must be returned at the customer s expense to SKUTCH Electronics along with a copy of the original invoice After the unit has been repaired SKUTCH will ship the PRODUCT back via UPS GROUND service at our expense only within the Continental United States If any other form of return shipment is requested the customer will pay for 100 of the shipping cos...

Reviews: