background image

Page 5 of 5 

ACTA Statement

 

 
 

This  equipment  complies  with  Part  68  of  FCC  rules  and  the  requirements  adopted  by 

ACTA. On the  bottom side of this equipment is a label that contains, among other information, a 
product identifier in the format US: AAAEQ##TXXXX.  If requested, this number must be provided 
to the telephone company. 

 
A  plug  and  jack  used  to  connect  this  equipment  to  the  premises  wiring  and  telephone  network 

must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant 
telephone  cord  and  modular  plug  is  provided  with  this  product.  It  is  designed  to  be  connected  to  a 
compatible modular jack that is also compliant. See installation instructions for details. 

 

The  REN  is  used  to  determine  the  number  of  devices  that  may  be  connected  to  a 

telephone  line.  Excessive  RENs  on  a  telephone  line  may  result  in  the  devices  not  ringing  in 
response to an incoming call. In most but not all areas, the sum of RENs should not exceed five 
(5.0). To be certain of the number of devices that may be connected to a line, as determined by 
the total RENs, contact the local telephone company. For products approved after July 23, 2001, 
the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. 
The digits represented by ## are the REN without a decimal point 

(e.g

., 03 is a REN of 0.3). For 

earlier products, the REN is separately shown on the label. 
 

If  this  equipment  causes  harm  to  the  telephone  network,  the  telephone  company  will 

notify  you in advance that  temporary  discontinuance  of service may  be required. But if advance 
notice  isn't  practical,  the  telephone  company  will  notify  the  customer  as  soon  as  possible.  Also, 
you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 
 

The  telephone  company  may  make  changes  in  its  facilities,  equipment,  operations  or 

procedures  that  could  affect  the  operation  of  the  equipment.  If  this  happens  the  telephone 
company  will  provide  advance  notice  in  order  for  you  to  make  necessary  modifications  to 
maintain uninterrupted service. 
 

If  trouble  is  experienced  with  this  equipment

for  repair  or  warranty  information,  please 

contact our company

If the equipment is causing harm to the telephone network, the telephone 

company may request that you disconnect the equipment until the problem is resolved. 

 
Connection to party line service is subject to state tariffs. Contact the state public utility 

commission, public service commission or corporation commission for information. 

Summary of Contents for CK-1P7






Reviews: