SKY Agriculture Maxi Drill 6000, Original Instructions Manual

GENERAL SAFETY REGULATIONS

Every time the tractor/machine assembly is to be 

started up and used, you should ensure beforehand 

that it complies with current legislation on safety at 

work and Road Traffic regulations.

GENERAL

1 - 

In addition to the instructions contained in this 

manual, legislation relating to safety instructions 

and accident prevention should be complied with. 

2 - 

Warnings affixed to the machine give indications 

regarding safety measures to be observed and help 

to avoid accidents. 

3 - 

When travelling on public roads, abide by the 

provisions of the Highway Code. 

4 - 

Before starting work, it is essential that the user 

familiarizes himself with the control and operating 

elements of the machine and their respective 

functions.  When the machine is running, it may be 

too late. 

5 - 

The user should avoid wearing loose clothing 

which may be caught up in the moving parts. 

6 - 

We recommend using a tractor with a safety cab 

or roll bar conforminwwg to standards in force. 

7 - 

Before starting up the machine and beginning 

work, check the immediate surroundings, 

particularly for children.  Make sure that visibility is 

adequate.  Clear any persons or animals out of the 

danger zone. 

8 - 

It is strictly forbidden to transport any persons 

or animals on board the machine whether it is in 

operation or not. 

9 - 

The machine should only be coupled up to the 

tractor at the specially provided towing points and in 

accordance with applicable safety standards. 

10 - 

Extreme care must be taken when coupling or 

uncoupling the machine from the tractor. 

11 - 

Before hitching up the machine, ensure that 

the front axle of the tractor is sufficiently weighted.  

Ballast weights should be fitted to the special 

supports in accordance with the instructions of the 

tractor manufacturer. 

12 - 

Do not exceed the maximum axle weight or the 

gross vehicle weight rating. 

13 - 

Do not exceed the maximum authorized 

dimensions for using public roads. 

14 - 

Before entering a public road, ensure that the 

protective and signalling devices (lights, reflectors, 

etc.) required by law are fitted and working properly. 

Replace burnt out bulbs with the same types and 

colours. 

15 - 

All remote controls (cords, cables, rods, hoses, 

etc.) must be positioned so that they cannot 

accidentally set off any manoeuvre which may cause 

an accident or damage.

16 - 

Before entering a public road, place the machine 

in the transport position, in accordance with the 

manufacturer’s instructions. 

17 - 

Never leave the driver’s position whilst the 

tractor is running. 

18 - 

The speed and the method of operation must 

always be adapted to the land, roads and paths.  

Avoid sudden changes of direction under all 

circumstances. 

19 - 

Precision of the steering, tractor adhesion, road 

holding and effectiveness of the braking mechanism 

are influenced by factors such as the weight and 

nature of the machine being towed, the front axle 

stage and the state of the land or path.  It is essential, 

therefore, that the appropriate care is taken for each 

situation. 

20 - 

Take extra care when cornering, taking account 

of the overhang, length, height and weight of the 

machine or trailer being towed. 

21 - 

Before using the machine, ensure that 

all protective devices are fitted and in good 

condition. Damaged protectors should be replaced 

immediately. 

22 - 

Before using the machine, check that nuts and 

screws are tight, particularly those for attaching 

tools (discs, flickers, deflectors, etc.).  Tighten if 

necessary. 

23 - 

Do not stand in the operating area of the 

machine. 

24 - 

Caution!  Be aware of any crushing and shearing 

zones on remote-controlled and particularly 

hydraulically-controlled parts. 

25 - 

Before climbing down from the tractor, or before 

any operation on the machine, turn off the engine, 

remove the key from the ignition and wait until all 

moving parts have come to a standstill. 

26 - 

Do not stand between the tractor and the 

machine until the handbrake has been applied and/

or the wheels have been wedged. 

27 - 

Before any operation on the machine, ensure 

that it cannot be started up accidentally. 

28 - 

Do not use the lifting ring to lift the machine 

when it is loaded.

PROPER USE OF THE MACHINE

The Seed drill must only be used for tasks for which it 

has been designed. 

The manufacturer will not be liable for any damage 

caused by using the machine for applications other 

than those specified by the manufacturer. 

Using the machine for purposes other than those 

originally intended will be done so entirely at the 

user’s risk. 

Proper use of the machine also implies: 

- complying with instructions on use, care and 

maintenance provided by the manufacturer; 

- using only original or manufacturer recommended 

spare parts, equipment and accessories. 

The Seed drill must only be operated, maintained 

and repaired by competent persons, familiar with 

the specifications and methods of operation of the 

machine.  These persons must also be informed of 

the dangers to which they may be exposed. 

The user must strictly abide by current legislation 

regarding: 

- accident prevention; 

- safety at work (Health and Safety Regulations); 

- transport on public roads (Road Traffic 

Regulations). 

Strict compliance with warnings affixed to the 

machine is obligatory. 

The owner of the equipment shall become liable for 

any damage resulting from alterations made to the 

machine by the user or any other person, without the 

prior written consent of the manufacturer. 

- The noise emission value measured at the driving 

position with the cab closed (level of acoustic 

pressure) is 75 dB(A).  

Measuring device: SL 401 

Position of the microphone placed in accordance 

with Paragraph B 2.6 of Appendix B of NF EN ISO 

4254-1. 

This level of acoustic pressure essentially depends on 

the tractor used.

HITCHING

1 - 

When hitching or unhitching the machine from 

the tractor, place the control lever of the hydraulic lift 

in such a position that the lifting mechanism cannot 

be activated accidentally. 

2 - 

When hitching the machine to the three-point 

lifting mechanism of the tractor, ensure that the 

diameters of the pins or gudgeons correspond to the 

diameter of the tractor ball joints. 

3 - 

Caution!  In the three-point lifting zone, there may 

be a danger of crushing and shearing. 

4 - 

Do not stand between the tractor and the 

machine whilst operating the external lift control 

lever. 

5 - 

When in transport, lifting mechanism stabilizer 

bars must be fitted to the machine to avoid floating 

and side movement. 

6 - 

When transporting the machine in the raised 

5

●

These symbols are used in these instructions every time recommendations are provided concerning your safety, the safety of others or the correct 

operation of the machine.

●

These recommendations must be given to all users of the machine.

Danger. Risk of escaping high-

pressure hydraulic fluid which 

can penetrate in the body. 

Read the user manuel before 

maintenance of the hydraulic 

system.

Danger Moving 

parts,keep away.

Risk of damage to the 

machine Consult the 

instruction leaflet

Danger of falling of 

the machine. Do not 

climb on the machine.

Risk of accident.

Operating tip

Risk of damageto the 

machine.

Read carefully and 

follow the user 

manual and safety 

informations before 

starting up the 

machine. 

Danger. Particules ejected by 

the machine at high speed. 

Keep away from the machine 

when the tractor engine is 

running

Danger. When 

manipulating 

chemical products, 

wear adapted 

protection clothes 

Safety regulations

EN