6
2. Installation
2.1 Insert SIM card
Open the small
cover in shape of “
凸
”at the bottom of the SMS Printer,
insert the valid SIM card.
2.2 Install the thermal print paper
Open the dome cover at the top, install the thermal paper.
2.3 Install antenna
Connect the antenna to the antenna interface at the left side of the sms
printer, screw it clockwise.
2.4 Power on
Connect one end of AC adapter to the device and another end to 220V AC
socket, move the switch at the back of the device at the position of "ON", the
device is on and display version number, then it will search wireless network,
when succeeds, it will enter into idle state and display company's logo.
2.5 Screen Display in Standby Mode
LOGO
Display
Signal Strength
Date and time
Menu
SIM1
GPRS
Contacts
Battery
Indicator
Telecom
Carrier