1) Reserve Chute Installation
The initial installation of the reserve parachute
must be done by specialists only.
We recommend that the initial installation of the
reserve parachute be done by an experienced
person. Ask the paragliding supplier to do the
initial installation of the reserve parachute, and
familiarise yourself with the process of installation.
The size of the reserve pocket on REVERSE 2 is
suitable for almost all current reserve systems. If it
is not possible to connect the harness reserve
handle to loops on the parachute deployment
bag inside the pocket, it can also be sewn in at
an appropriate place, which must be done by
a qualifi ed person only.
WARNING!
After the installation of the reserve parachute in
the harness, it is ABSOLUTELY ESSENTIAL to
do a simulation under a static swing, making
sure that the parachute release system operates
correctly and the parachute comes out easily.
The elastic cord which closes the reserve pocket
must be checked regularly. If the cord is worn, it
must be replaced.
Every time you put the reserve parachute back
into the harness, check that it is suffi ciently robust
by applying a load of 10 kg.
Before each fl ight, check that the pin and handle
are positioned correctly.
Harness Set-Up
4
8
Summary of Contents for REVERSE 2
