sky rider Drone-asaur DR397 v1903-01, User Manual

15

If you are experiencing problems using or flying the craft, consult this table.

Troubleshooting

PROBLEM

POSSIBLE CAUSES 

SOLUTION

Craft does not 

respond to controls.

•  No power to remote  

or craft.

•  Poor contact between 

power plugs.

•  Craft is out of range.

•  Check remote batteries, 

replace if needed.

•  Check craft battery, be 

sure it is fully charged.

•  Be sure the power plugs 

are firmly connected.

•  Be sure the remote has 

an unobstructed line of 
sight to the craft.

•  Remain within the 

remote’s 164 ft. range.

Craft is difficult 

to control or flies 

erratically.

•  Gyroscopes may  

be misaligned.

•  Power OFF remote and 

craft and reconnect 
(see pg. 9).

Craft drifts  

while in flight.

•  Trim not set or needs 

adjustment.

•  Adjust trim settings  

(see pg. 11).

•  Reset trim settings  

(see pg. 12).

Craft suffers from 

mechanical trouble.

•  Damage to body, rotors 

or other parts.

•  Repair or replace parts 

as needed.

LED lights ON but 

craft does not 

respond to controls.

•  Low battery power.

•  Recharge the battery.