19
Troubleshooting Guide
Troubleshooting
PROBLEM
POSSIBLE CAUSES
SOLUTION
Craft does not
respond to controls.
ű
No power to remote
or craft.
ű
Poor contact between
power plugs.
ű
Craft is out of range.
ű
Check remote batteries,
replace if needed.
ű
Check craft battery, be
sure it is fully charged.
ű
Be sure the power plugs
are firmly connected.
ű
Be sure the remote has
an unobstructed line of
sight to the craft.
ű
Remain within the
remote’s 300 ft. range.
Craft is difficult
to control or flies
erratically.
ű
Gyroscopes may
be misaligned.
ű
Power OFF remote and
craft and reconnect
(see pg. 9).
Craft drifts
while in flight.
ű
Trim not set or needs
adjustment.
ű
Adjust trim settings
(see pg. 11).
Craft suffers from
mechanical trouble.
ű
Damage to body,
rotors or other major
components.
ű
Repair or replace parts
as needed.
LED lights ON but
craft does not
respond to controls.
ű
Low battery power.
ű
Recharge the battery.