23
PROBLEM
POSSIBLE CAUSES
SOLUTION
Craft is
unresponsive
• No power to remote
or craft
• Poor contact between
power plugs
• Craft is out of receiver
range
• Check remote batteries,
replace if needed
• Check craft battery, be
sure it is fully charged
• Be sure the power plugs
are firmly connected
• Be sure the remote has
an unobstructed line of
sight to the craft
• Remain within the
remote’s 250 ft. range
Craft
flies erratically
• Gyroscopes may
be misaligned
• Perform Pre-Flight
Calibration again
(see pg. 10)
• Perform factory reset
(see pg. 20)
Craft drifts
while in flight
• Trim not set or needs
adjustment
• Adjust trim settings
(see pg. 11)
Craft suffers from
mechanical
difficulty or
vibrates excessively
• Damage to body,
rotors, or other major
components
• Check to make sure
the craft has not taken
significant damage
• Replacement parts may
be needed (see pg. 21)
Formation lights ON,
but craft no
longer responds to
throttle inputs
• Low battery power
• Recharge the battery
If you are experiencing problems using or flying the craft, consult this table.
Troubleshooting
Summary of Contents for EAGLE PRO DRW676
Page 1: ...User s Guide for Model DRW676 v1657 01 ...
Page 28: ......