22
Step 4 - Calibrate the Drone’s Accelerometer
Next, the drone’s accelerometer and gyroscopes need to be calibrated. Place the drone on a
flat surface and perform the following actions in the app:
Flight Screen > Settings > Calibrate Accelerometer
The lights on the drone will begin flashing very quickly, indicating it is in calibration mode.
When successfully calibrated the lights will go back to blinking slowly. The drone is now
ready for flight.
Step 6 - Update GPS Position
Before flying and using the GPS features, you should update the GPS map and position.
Press the map thumbnail in the upper right corner of the screen. The screen will change to
the Map View and your position should update to your current location. When complete, the
lights on the drone will turn solid, indicating the drone has good GPS signal.
Step 7 - Unlock the Drone
The drone must be “unlocked” before you begin to fly. When the drone is unlocked the rotors
will start spinning (but the craft will not lift off).
Flight Screen > Press the Unlock icon
Step 8 - Take Off/Landing
To take off, press the
Take Off button
.
The drone will climb to a fixed height and hover
in place.
To land, press the
Landing button
and the drone will land automatically.
GPS Features
Consult the previous sections of this manual for instructions on using the various GPS
features of the app.
Flying with the App
