background image

200

200

Remove all packaging attachments before giving the toy to a child.

Not suitable for children under 3 years due to small parts that could be swallowed. 

Conforms to product safety standards ASTM F963. 

Keep instructions for future reference. Do not discard. 

This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause 

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

CAUTION:

 Changes or modi

fi

cations to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.  

NOTE:

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  

These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  If 

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving 

antenna - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for help.

INSTRUCTION GUIDE

CONTENTS

RC Nano Drone

Remote Control

4 Replacement Blades

USB Charging Cable

12

Summary of Contents for m200 Nano Drone













Reviews: