42
• Set date format in the positions of
YY
(year),
MM
(month) and
DD
(day), YY/MM/DD, DD/MM/YY (default) or MM/DD/YY.
With a wireless network connected, GMT (+00:00) time is the time
reference for the time setting. When you set the time, add or deduct the
hours according to your time zone.
Alarm
Select the alarm function in configuration.
You can choose between three different alarm settings:
• 2 independent alarms (
Alarm 1
and
Alarm 2
) and
• Nap function
Alarm 1 and 2:
Choose “Turn on” and set the following parameter:
• days you want to be woken up
• time
• alarm tone (Beep, Melody or Internet)
Note:
If the alarm sound is set to Internet Radio, only the last played
internet station can be chosen for both alarms.
Once the alarm time is reached, the appliance will connect with the
internet as long as a connection is available. Therefore, there may be
some delay between alarm and radio playback.
If no network connection will be available within one minute, the alarm
sound will change to Melody automatically.
Nap Function
With the nap function you can delay your getting up, up to 120 minutes. The
alarm goes off again after the set time (5/10/20//30/6090/120 minutes).
This function is perfect for a short nap, without having to change the
actual alarm time.
You may choose
Alarm Volume
to configure the volume of the alarms.
When the alarm(s) is/are set, a “clock” icon will be shown on the LCD-
monitor. The clock icon with alarm time will also be clearly displayed on
the standby mode screen.
Once the alarm goes off, press any key to enter the snooze mode. The
alarm will be interrupted and will go off again 5 minutes later. Press the
STANDBY
key to stop the alarm.
Summary of Contents for IR 60S
Page 52: ...Ref IR 60S IR61W 15 2018 01 ...