background image

Celestron 
2835 Columbia Street
Torrance, CA 90503
Tel. (310) 328-9560
Fax. (310) 212-5835
Web site at http://www.celestron.com

Copyright 2012 Celestron 
All rights reserved.

(Products or instructions may change without notice or obligation.)

FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Printed in China

MINI-dOb keyPAd ShORTCUTS:

bASIC COMMANdS

Turn .tracking .on/off .

 .

 .

“1a” .+ .2b”

Turn .tracking .beep .on/off .

 .

Press .and .hold .“1a” .for .5 .seconds

Turn .keypad .backlight .on/off .

 .

Press .and .hold .“2b” .for .5 .seconds

Set .latitude .

 .

 .

 .

“2b” .+ .“3c”

Set .preset .positions .

 .

 .

“SET” .+ .“a” .through .“f”

Go .to .preset .positions .  .

 .

“GO” .+ .“a” .through .“f”

Start .camera .cruising .  .

 .

Choose .rate .then .press .“GO” .+ .“SET”

Start .video .cruising .

 .

 .

Choose .rate .then .press .“GO” .+ .“DOWN”

Pause .camera/video .cruising .

 .

“SET”

Stop .camera/video .cruising .

 .

“RIGHT” .+ .“DOWN”

MINI-dOb PANORAMA COMMANdS

Measuring .FOV .  .

 .

“SET” .+ .“1A”

Lowest .point .of .image .  .

“SET” .+ .“DOWN”

Highest .point .of .image .  .

“SET” .+ .“UP”

Left .limit .of .image .

 .

“SET” .+ .“LEFT”

Right .limit .of .image .

 .

“SET” .+ .“RIGHT”

Start .panorama . .

 .

“1a” .+ .“3c” .

Pause .panorama .

 .

“SET”

Stop .panorama .  .

 .

“RIGHT” .+ .“DOWN”

Adjust .camera .trigger .timer .

“DOWN” .+ .“a” .through .“f” .(a=3 .seconds; .f=15 .seconds)

 .

 .

 .

 .

Note:

 .For .360° .panorama, .save .the .same .position .for .left .and .right .limits 

Summary of Contents for VIRTUOSO

















Reviews: