Assembly and Operating Manual Rare Bear
4
Fig. 5
- Check that the fin is exactly at right-angles to the
tailplane.
Fig. 6
- Apply a strip of Velcro tape to the underside of
the flight battery. Stick the mating piece inside of
fuselage.
Fig. 7
- Place the flight battery in the fuselage, but do not
connect it at this stage.
Fig. 8
Note: the ailerons should be connected to the
receiver using a Y-lead.
-
Connecting the receiver
: connect the servos and
the speed controller to the receiver. Refer to your
radio control system instructions for details of
channel assignments and servo lead polarity.
