Assembly and Operating Manual
4
Fig. 2
- Glue the control rod to Horizontal tail. (glue
not included)
Fig. 5
-
Glue the control rod to main wing panel.
(glue not included)
Fig. 3
-
Remove any excess glue and hold in
position until glue sets. The photo shows the
finished view.
Fig. 6
-
Remove any excess glue and hold in
position until glue sets. The photo shows the
finished view.
Fig. 4
-
Reverse the procedure to the left side. The
photo shows the finished view.
Fig. 7
-
Reverse the procedure to the
left side. The
photo shows the finished view.