Settings menu
Press&hold the
enter button
for 1 second until the menu bar is pulled up, then
release it and click the
right arrow button
.
Page menu
Press&hold the
enter button
for 1 second until the menu bar is pulled up, then
release it and click the
left arrow button
.
Use
arrow buttons
to scroll between widgets. Use the
enter button
to select the
highlighted widget. Then you can move and scale it by
arrow buttons
, click the
enter
button
to switch between its parameters. Press the
options button
to show widget
add/change/remove options.
Menu navigation
Use arrows to scroll, the
enter button
as enter and the
back button
as for return.
Press the
enter button
to highlight (blue color) the menu entry and use
arrow buttons
to change its value. Press the
enter button
again to store actual value.
Torch
When OFF, click the
left arrow button
to enable torch function. Click the same button
again to turn it OFF.
Power bank
When OFF, click
the options button
to enable the power bank function on the data
port. Click the same button again to turn it OFF.
Bluetooth speaker
Strato can play music or another sound stream from a portable Android or iOS
device via Bluetooth interface. To enable this function just turn on Bluetooth on your
phone and select Strato from available devices. Then play your favorite music and
enjoy :)
Vario acoustics editor
There is a PC web server based editor for audio profile/s inside Strato. To use this
feature, Strato needs to be connected to the local WiFi network (see Update
chapter). Go to the Wi-Fi submenu, then into Network info. If Strato has successfully
connected to your local network, it has assigned an IP address. Start a web browser
on your PC (we recommend Chrome) and type this IP address into the web address
line (e.g. “192.168.0.105”). Then follow instructions on this page. You can edit the
current audio profile or save it as another one. You can also save/load profiles
to/form files.
System
1
