www.skycat.pro
All Rights Reserved
24
Skycat Rescue Radio Specifications
•
Operation voltage: 3 cell Li-Po (11.1V).
•
Supported modules: TBS Crossfire TX / TBS Crossfire Micro TX.
•
Supports binding to multiple receivers simultaneously.
•
Pre-configuration: Unlimited adaptive mode. Check your country’s
regulations before operating. Re-configure if necessary. (page 18).
Disclaimer
Skycat is a backup system designed to help decrease the kinetic impact
energy of your multicopter, UAV or radio-controlled model in the case of an
emergency.
Skycat cannot prevent your multicopter, UAV or radio controlled model from
causing damage or even death at impact. It is only designed to eject a
parachute in order to decrease the velocity of your aircraft in an emergency
situation. Skycat is strictly a backup device and does NOT replace proper
training and timely execution of appropriate emergency procedures.
Skycat is an electromechanical device and as such, it can fail to work properly
which can result in false activation or no activation at all. Such failure can cause
injuries or death.
In the case of a false activation or inappropriately timed intended activation, the
ejection of the parachute can cause your multicopter, UAV or radio controlled
model to fly further and cause more damages, than it would have caused, had it
crashed to the ground in a free fall.
Skycat disclaims all warranties, whether expressed or implied, including but not
limited to the implied warranties of merchantability and fitness for a particular
purpose. Skycat does not assume any liability, whether direct or indirect from
the use of Skycat products. In no event shall Skycat be liable for personal injury
up to and including death.
