www.skycat.pro
All Rights Reserved
7
RADIO SETUP
For detailed instructions, please refer to the manuals of your transmitter and
autopilot. We have made instructions for some transmitters, you can find them at
our download page:
www.skycat.pro/downloads-1
DJI Phantom 3
1)
Decide which transmitter switch or button and channel you want to use to
launch the parachute.
2)
Connect Skycat XS servo lead to your receiver.
3)
Configure your transmitter so that when you flip the switch, parachute is
released.
Motors need to be stopped from DJI radio.
Please refer to the manual of the
DJI Phantom for further instructions.
Other models
1)
Decide which transmitter switch or button and channel you want to use to
launch the parachute.
2)
Connect Skycat XS servo lead to your receiver.
3)
Configure your transmitter so that when you flip the switch:
- Servo moves to release position.
- Motors are stopped in all flight modes.
Remove propellers
and test functionality:
1)
Apply 10-30% throttle.
2)
Flip the parachute switch. Motors should stop and servo should move to
release position.
3)
Repeat in all flight modes (manual, ATTI, GPS etc.)
