background image

Contents 

Preparation

    1. Set-up

    2. Quick Start Guide

Basic Operation

    1. Target Information 

    2. Audio Features

    3. Selecting Modes (Discrimination Patterns) 

    4. Sensitivity

    5. Notch Discrimination Pattern 

    6. PINPOINT

    7. Bench Tests

    8. Hunting Tips of the Metal Detector 

Battery Replacement

Troubleshooting

Care and Maintenance

Product Disposal

Contact Us

Thank  you  for  choosing  our  Metal  Detector  TX-650.  Please  read  this  manual 
carefully and know the function of TX-650 before use. And please keep it for 
future reference.

It is recommended to use the TX-650 outdoors, because of too much 
interference indoors.

In the higher sensitivity range, the detector will be more sensitive to elec-
tromagnetic interference. By reducing the sensitivity, the interference will 
be reduced correspondingly.

When detecting metals, move the search coil at a constant speed. Keep the 
search coil parallel with the ground and about 1/2 inch above the surface. 
Do not swing it like a pendulum.

For coin-sized objects, the depth indicator is accurate. But for large-sized 
objects or irregular-shaped objects, the accuracy will reduce slightly.

For most of the valuable metal objects, the detector will send out a consis-
tent signal. If the signal isn't consistent, it may be a false signal.

If the 

PINPOINT

 mode malfunctioned, sending a signal even though there 

is no metal, lift the detector and press the 

P-P

 button once to solve the 

problem.

Tips:

1. 

2. 

3. 

4. 

5. 

6. 

- 1 -

------------------------------------------------------------------------------------------

--------------------------------------------------------------------------------------------

--------------------------------------------------------------------------------

----------------------------------------

---------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------

----------------------------------------------------------------------------

-------------------------------------------------------------------------------------

----------------------------------------------------------------------------------

----------------------------------------------------------------------------------

--------------------------------------------------------------------------------------------

--------------------------------------------------------------------------

--------------------------------------------------

----------------------------------------------------------

---------------------------------------------------------------------------

----------------------------------------------------------------------------

------------------------------------------------------------------------------------

2

2

4

6

6

8

8

9

10

11

12

13

15

16

17

17

18

Summary of Contents for TX-650












Reviews: