Safety information
.
RT4,RT9 Touch W heel RF Remote Controller
:
: Touch
to change
current
zone
static RGB color
.
:
:
:
1
2
4
3
R
G
B
W
S
1
S
2
●
RGBW4ZTC 4 zone RGB/ RGBW remote
1
2
4
3
S
1
S
2
R
G
W
B
: Short press turn on/off all zone light.
: For RGB light, short press turn on/off white (RGB mix), long
press 1-6s adjust saturation continously, namely change current
static RGB color to mixed white slowly. For RGBW light, short
press turn on/off W channel, long press 1-6s adjust W brightness
continously, namely change saturation by add white color slowly.
For static color, adjust brightness,
short press 10 levels,
long press 1-6s for continous 256 levels adjustment.
For dynamic mode, adjust speed,
short press 10 levels, long press 2s get the default speed.
: Short press recall the scene, long press 2s save current state into S1/S2.
the LED indicator display green when save OK.
4 zone recall or save synchronously.
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative
polarity. A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. if no response from the receiver, please re-match the remote
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
Short press select and turn on zone light,
long press 2s turn off zone light.
Short press multiple zone key fastly,
will select multiple zone synchronously.
: Short press get red, green or blue color directly.
long press 1-6s adjust R/G/B brightness
continously to achieve millions of colours.
Adjust dynamic mode for current selected zone,
Short press run next dynamic mode, long press 2s run mode-cycle