D
Selecting such an inappropriate option will simply redisplay the Main Menu, or an
explanatory message.
NOTE – always press Escape to leave Main Menu mode and return to Log Mode. Else the
logger will not record any data.
4.2.1 Option 0 - Display Readings From All Active Channels
This menu option will display instantaneous readings from all active channels each time the
space bar is pressed on the PC keyboard, whatever logging intervals, thresholds or time
modes have been set. Storage of readings does not occur when using this Option. See
Section 3.2.15 for the Log on Demand mode, if logging is required. Escape cancels this mode
and returns to the Main Menu.
NOTE - beware of irregular instantaneous readings from certain sensors which depend on a
timed reading, e.g. windspeed, this will give metres per time interval of the space bar press in
this mode.
NOTE – always press Escape to leave Main Menu mode and return to Log Mode. Else the
logger will not record any data and batteries will drain quickly.
4.2.2 Option 1 - Display Current Setup
This option displays a sub-menu requesting the user to select which items to display, as
below. This is very useful to check logger configuration, memory status and battery voltage.
SELECT THE ITEM REQUIRED
0 -
CHANNEL CONFIG’N AND SCALING
1 -
SAMPLE AND LOG INTERVALS
2 – LOG MODE AND THRESHOLDS
3 -
AX+B SCALING FACTORS
4 -
ALARM RELAY SETUP
5 -
TIME, BATTERY, MEMORY & TIMED LOG STATUS
6 -
RETURN TO MAIN MENU
Option 0 displays each software channel, which is active alongside its associated hardware
channel, gain, termination and scalecode.
Option 1 displays each software channel, which is active with its chosen sampling and storage
times.
Option 2 displays each software channel, which is active, with its associated scalecode,
logging threshold and logging mode.
21
