D
9) To attach the solar panel, first remove the 2 centre bolts
on the bars at the rear of the solar panel.
Line the empty screw holes up with the solar panel mast
bracket with the black box on the solar panel at the hinge
end.
Replace the 2 bolts and tighten with the adjustable
spanner.
10) The assembly should be angled to obtain maximum
sunlight throughout the year before being fully tightened.
11) The solar panel should now be covered temporarily (the cardboard packing, a thick jacket or
refuse sack are ideal) to ensure no voltage is produced.
12) Now connect the solar panel
The solar panel has two white cables with
a connector on each end. These
connectors mate with the two sockets on
the D enclosure. Click these
connectors into place.
58
