7
When the data has finished scrolling, on the Skye PC software choose the File menu and Close
Data Capture File. You can view and analyse your data saved in the filename above, use View Data
Files in WizzCom or SkyeLynx Deluxe, or Microsoft Word, Excel etc.
Disconnect the Psion-PC datalead. You may switch off the Workabout in this state if you wish, it
will switch on showing the same screen again later. Or if you prefer return to the icon display, press
MENU, choose the SPEC Special menu , use the arrows to scroll down the EXIT and press ENTER.
3.5 Deleting data from the Workabout memory
The Workabout has a 2Mbyte memory, this will hold approximately 4 datafiles of ‘full’ DataHog
memory, or may more smaller ones. You will find it necessary to delete some data files once they have
been safely transferred to the PC.
If the Workabout is still in the Terminal Window (blank screen with cursor), return to the icon
display - press MENU, choose the SPEC Special menu , use the arrows to scroll down the EXIT and
press ENTER.
1.
In the icon display, press MENU, use the arrow keys to choose the FILE menu and highlight
DELETE FILE and press ENTER.
2.
When FILE NAME is highlighted, press TAB and use the arrow keys to highlight the filename
you wish to delete and press ENTER. (If you cannot see it at first, highlight ‘\’ and press ENTER,
this may bring up another ‘folder’, scroll to find your file and press ENTER)
3.
FROM NAME should now show your filename, press ENTER again. Press Y to confirm delete.