SkyeReader 300 User Guide
16
Copyright 2009 SkyeTek, Inc. All Rights Reserved.
Protocol
The Protocol tab lets you send specific SkyeTek Protocol v3.0 (STPv3) commands to the
reader so that you can develop and test software to support your specific application.
•
For detailed information on understanding and using STPv3 commands, flags,
fields, and responses, refer to the SkyeTek Protocol v3 Reference Guide.
•
Refer to the reference guide for your SkyeModule reader for reader-specific
examples of using STPv3 commands.
Protocol Panel
How to Use:
To execute a command:
1. Click on the arrow next to the Command field. This displays a pull-down list of
all reader and tag commands.
2. Click on a command on the list.
3. Enter additional values for the command parameters:
•
Reader—Lets you specify a reader ID if you click the RID flag checkbox.
•
Flags: SkyeWare automatically highlights the available flags for each
command that you select from the command list.
o
Loop—enables loop mode for tag selection.
o
Inventory—enables Inventory mode for tag selection
o
Lock—the command will lock tags or blocks of tag memory
