SkyeReader 300 User Guide
18
Copyright 2009 SkyeTek, Inc. All Rights Reserved.
•
Read and write to all system parameters supported by the reader. (See the
reference guide for your SkyeModule reader for more information on
which parameter address and values are supported.)
•
Perform all tag commands supported by the reader, including
communications with specific tag types. (See the protocol document for
supported commands and the reference guide for specific tag examples.)
•
Use the memory field for writing to system parameters or when reading
and writing to tag memory. (See the reference guide for your SkyeModule
reader for the address, number of blocks and valid data values for different
system parameters.)
•
Select whether data is transmitted in ASCII or binary format – when using
binary mode, the CRC flag is required.
The Response section displays all responses to commands in the text field
with a time stamp of when the response was received. You can also:
•
Click the Clear button to clear the screen and reset the defaults.
•
View the response received from the reader in the Code field.
•
View contents of the Tag Type field which is valid when sending tag
commands only and provides the tag type being used.
•
View the contents of the Data field, which contains the data stored in the
specified address or the tag id when issuing a Select Tag command
.
