background image

 

                                              

 

User Guide                                         

____________________________________________________________________________________

 

Confidential and Proprietary 

 

  

10/2/2008 

 

Regulatory Compliance 
 
FCC 
 

The GVT-3000 has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 Subpart B of the FCC rules. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there 

is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures: 
- Reorient or relocate the receiving antenna 
- Increase the separation between the equipment and receiver 
- Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected 

- Consult the dealer or an experienced radio/TV technician for help. 
 
Disclaimer 
 

SkyGuard disclaims all responsibility for any act or omissions, or for breach of law, code 
or regulation, including local or state codes, performed by a third party. 
SkyGuard strongly recommends that all installations, hookups, transmissions, etc., be 
performed by persons who are experienced in the fields of radio frequency technologies. 

SkyGuard acknowledges that the installation, setup and transmission guidelines contained 
within this publication are guidelines, and that each installation may have variables 

outside of the guidelines contained herein. Said variables must be taken into consideration 
when installing or using the product, and SkyGuard shall not be responsible for 
installations or transmissions that fall outside of the parameters set forth in this 
publication. 
SkyGuard shall not be liable for consequential or incidental damages, injury to any person 

or property, anticipated or lost profits, loss of time, or other losses incurred by Customer 

or any third party in connection with the installation of the Products or Customer's failure 
to comply with the information and instructions contained herein. 
 
 Warning  

 
In order to comply with RF exposure limits established in the ANSI C95.1 standards, it is 
recommended when using SkyGuard GPS/ GSM Tracking Device that the device is 

positioned more than 20 cm from your body or nearby persons during extended periods of 
transmitting or operating time.  

 

Summary of Contents for GVT-3000















Reviews: