Rough Terrain Scissors
December 2007
Page 23
Section 2 - Familiarization
Visual & Maintenance Inspection
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
F
AMILIARIZA
TION
2.3-9 Base
• Base Weldment
-
Ensure there are no visible cracks in
welds or structure and there are no signs
of deformation.
• Wheel/Tire Assembly
The aerial platform is equipped with foam-
filled tires. Tire and/or wheel failure could
result in an aerial platform tipover. Component
damage may also result if problems are not
discovered and repaired in a timely fashion.
Refer to
Table 4.2
for wheel/tire specifications.
WARNING
Intermixing tires of different types or
using tires of types other than those
originally supplied with this equipment
can adversely affect stability. Therefore,
replace tires only with the exact Skyjack-
approved type. Failure to operate with
matched approved tires in good condition
may result in death or serious injury.
-
Check all tire treads and sidewalls for
cuts, cracks, punctures and unusual
wear.
-
Check each wheel for damage and
cracked welds.
-
Check each lug nut for proper torque to
ensure none are loose.
-
Check wheel motor assembly for loose
or missing parts and signs of visible
damage (If equipped).
-
Ensure wheels are aligned and true
vertically and horizontally.
Wheel/Tire
Assembly
Steer Cylinder
Assembly
Tie Rod
Overhead View
Base
Weldment
Splitter Manifold
Emergency Lowering Access Rod
Summary of Contents for SJ 68RT Series
