Page 42
December 2007
Rough Terrain Scissors
TM
Component Identification (Special Options)
Operation - Section 3
3.6 Component Identification
(Optional Equipment/Attachments)
This section describes the components that are optional
to aerial platforms.
3.6-1 Outrigger/Generator Control Console
(Auto-leveling) (If Equipped)
The outrigger/generator control console is located next
to the platform control console. These switches control
the generator, and outriggers’ extension and retraction.
4
1
2
5
3
Figure 3-4. Outrigger/Generator Control Console with
All Options
1.
Generator Switch
- This switch activates the
generator.
2.
Outrigger Extend/Retract Switches
- These
switches control the extension or retraction of
each individual outrigger.
3.
Auto-Level Switch
- In the “
” extend position,
each outrigger extends and automatically adjusts
until aerial platform is level. In the “
” retract
position, the outriggers retract.
4.
Outrigger Enable Switch
- This “
” outrigger
enable switch, when in the extend or retract
position, activates functions on the auto-level
switch and outrigger extend/retract switches.
5.
Leveling Indicator Light
- This light illuminates
to display the status of the outriggers when the
auto and manual level functions are in use. The
indicator light has the following states:
Off:
The outriggers are fully retracted.
Flashing Rapidly:
The outriggers are extending
but the platform is not level.
Flashing:
The outriggers are extended but the
platform is not yet level.
Solid:
The outriggers are extended and the
platform is level.
Summary of Contents for SJ 68RT Series
