Page 50
December 2007
Rough Terrain Scissors
TM
Start Operation
Section 3 - Operation
3.8-10 Generator (If Equipped)
To start generator:
1.
On platform control console, select lift/drive switch
to “
” lift position.
2.
On outrigger/generator control console, select
generator switch to “
” energized position. The
engine will automatically switch to low throttle and
the generator will start.
To restore normal operation:
3.
Flip generator switch to “
” off position. The
generator will turn off.
NOTE
Activating any lift or outrigger functions,
changing key switch settings, activating
emergency stop or an engine stall will turn
off the generator. The platform may be
lowered during generator operation.
3.8-11 Shutdown Procedure
1.
Completely lower the platform.
2.
On platform control console, push in “
”
emergency stop button.
WARNING
Ensure that you maintain three points of
contact when using the ladder to mount/
dismount platform.
3.
Use the ladder to dismount from platform..
4.
Turn platform/engine/base key switch to “
”
engine position and remove key.
5.
Turn main power disconnect switch to “
” off
position.
Summary of Contents for SJ 68RT Series
