51
SJ30 AJE SJ30 ARJE
213213AAA
Function Tests
Section 4 – Pre-operation
7.
Activate any drive function.
8.
Press the sensor bar for less than 1 second and
then release.
▪
Result:
The function will stop while the bar
is being pressed and motion will resume
when the bar is released. The audible/visual
alarm should activate while the bar is being
pressed and turn off after being released. The
reset button should illuminate as soon as the
sensor bar is pressed and turn off when the
bar is released.
9.
Press the sensor bar for more than 1 second
and then release.
▪
Result:
The function will stop and the audible/
visual alarm should activate immediately and
stay on after the bar is released. The reset
button should illuminate.
10.
Press the reset button.
▪
Result:
The audible/visual alarm and reset
button light should go off.
11.
Activate any platform function (i.e. lift/extend/
rotate).
12.
Press the sensor bar for less than 1 second and
then release.
▪
Result:
The function will stop while the bar is
being pressed and motion will resume when
the bar is released. The audible/visual alarm
should activate while the bar is being pressed
and turn off after being released. The reset
button should illuminate as soon as the sensor
bar is pressed and turn off when the bar is
released.
13.
Press the sensor bar for greater than 1 second
and then release.
▪
Result:
The function will stop and the audible/
visual alarm should activate immediately and
stay on after the bar is released. The reset
button should illuminate.
14.
While the audible/visual alarm is sounding, verify
that the LED solid light is also active.
WARNING
Ensure that you maintain three points of contact to
mount/dismount platform.
15.
Exit the platform.
16.
Turn base/off/platform key switch to base
position.
17.
On the base control console, activate the
emergency power switch and the function
enable switch and any function momentarily.
▪
Result:
The function should operate and the
platform audible/visual alarm and reset button
light should turn off.
WARNING
Ensure that you maintain three points of contact to
mount/dismount platform.
18.
Enter platform and close gate (if equipped).
TM
1
2
3
4
Reset
button
Emergency power switch
Horn
Drive/Steer
controller
Emergency stop
Platform leveling override switch
To
order
go
to
Discount-Equipment.com
