Telescopic Boom Series
Models SJ61T & SJ66T
194312
December 2007
Page 133
Section 4 - Troubleshooting Information
Service and Maintenance
4.1-43 Mid Throttle Inoperative
1.
Loose or broken wire #08 from platform terminal block to throttle switch S10.
-
Check continuity. Replace if defective.
2.
Open or defective diode D08. (Generator option only)
-
Check diode. Replace if defective.
3.
Defective throttle switch S10.
-
Check continuity through switch while activating mid throttle function between wires #08 and
#79. If no continuity found replace switch.
4.
Loose or broken wire #79 from throttle switch S10 to plug B pin #20 in platform control console.
-
Check continuity. Replace if defective.
5. Loose or broken wire #79 in Cable B or its connectors.
-
Check for continuity between pins #20 on cable B. Check for loose or corroded connections
on cable connectors. Replace if wire is defective.
(Deutz TD2.9L Diesel Only)
6.
Loose or broken wire #79 from base plug B pin #20 to relay 79CR.
-
Check continuity. Replace if defective.
7.
Loose or broken wire #02 from base terminal block to relay 79CR.
-
Check continuity. Replace if defective.
8.
Loose or broken wire #90 from relay 79CR to base terminal block.
-
Check continuity. Replace if defective.
9.
Loose or broken wire #99B from relay 79CR to base terminal block.
-
Check continuity. Replace if defective.
10.
9. Defective relay 79CR.
-
Check relay. Replace if defective.
(Deutz D2011 Diesel Only)
11.
Loose or broken wire #79 from base plug B pin #18 to relay 79CR.
-
Check continuity. Replace if defective.
12.
Loose or broken wire #02 from base terminal block to relay 79CR.
-
Check continuity. Replace if defective.
13.
Loose or broken wire #99 from relay 79CR to ECU connector pin #18.
-
Check continuity. Replace if defective.
14.
Loose or broken wire #103 from relay 79CR to base terminal block.
-
Check continuity. Replace if defective.
15. 10. Loose or broken wire #103 from base terminal block to ECU connector pin #17.
-
Check continuity. Replace if defective.
16.
11. Defective relay 79CR.
-
Check relay. Replace if defective.
(GM Engine Only)
17.
Loose or broken wire #79 from base plug B pin #18 to engine harness plug.
-
Check continuity. Replace if defective
18.
Loose or broken wire #79 from engine harness plug to GM engine connector 2.
-
Check continuity. Replace if defective.
19.
Loose or broken gray/dark blue wire from GM engine connector to ECU connector pin #51.
-
Check continuity. Replace if defective.
20.
Loose or broken purple/light blue wire from ECU connector pin #5 to throttle actuator RA1.
-
Check continuity. Replace if defective.
21.
Defective throttle actuator RA1.
-
Check actuator. Replace if defective.
Summary of Contents for SJ61T
