30
SJ82 T, SJ86 T
229040ABA
Section 1 – Scheduled Maintenance
Function Tests
1.7 Function Tests
Function tests are designed to discover any
malfunctions before an aerial platform is put into
service. The operator must understand and follow
step-by-step instructions to test all aerial platform
functions.
IMPORTANT
Never use a malfunctioning aerial platform. If
malfunctions are discovered, aerial platform must be
tagged and placed out of service. Repairs to aerial
platform may only be made by a qualified service
technician.
▪
After repairs are completed, the operator must
perform a pre-operation inspection and a series
of function tests again before putting aerial
platform into service.
▪
Prior to performing function tests, be sure to
read and understand the “Start Operation”
section of the operating manual.
▪
For function tests that are to be performed,
please refer to the operating manual that
corresponds to the correct serial number. Found
there will be detailed instructions for which
tests to perform, as well as how to properly and
successfully perform them.
NOTE
The all-function motion alarm should sound while
operating any boom and drive function.
To
order
go
to
Discount-Equipment.com
