5
Option 1 - Battens
If you are face fixing the blind to the
underside
of the batten, set the fixing
profile back in the reveal by at least 93mm
from the bottom of the batten to ensure
the blind headbox is within the reveal.
Proceed to fit all 4 lengths of profile
ensuring the profile it level
.
If you are face fixing the blind to the
top
of the fixing profile, fit one length of
box section to the control end of the
window reveal.
This is the start of the shelf.
Offer the other 3 fixing profiles into
position and drill fixing holes ready for
these to be fitted into place.
Do not fix these into position yet
.
Decide if you want to use battens or angles
.
Summary of Contents for LANTERNLITE
