7. WARRANTY
If, within one year from date of purchase, this product should become defective
(except battery), due to faulty workmanship or materials, it will be repaired or
replaced, without charge. Proof of purchase and a Return Authorization are required.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
5. FCC
To prevent possible SERIOUS INJURY or DEATH from a closing garage door:
- Activate door ONLY when it can be seen clearly, is properly adjusted, and there
are no obstructions to door travel.
- ALWAYS keep garage door in sight until completely closed. NEVER permit
anyone to cross path of closing garage door.
6. WARNING
CUSTOMER SERVICE
17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3
Email:support@skylinkhome.com
http://www.skylinkhome.com
P/N. 101Z515
US Patent. 6,597,291
® are registered trademarks of their respective corporations
©2008 SKYLINK GROUP
If you would like to order Skylink’s products or have difficulty getting them to work
or download latest information & user manual, please :
1. visit our FAQ section at www.skylinkhome.com, or
2. email us at support@skylinkhome.com, or
3. call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST.
Fax (800) 286-1320
8. CUSTOMER SERVICE
4. ACCESSORIES
Optional accessories can be added to the garage door closer.
4-Button Keychain Remote – Model 4B-201
- Keychain remote can be programmed to the garage
door closer so it operates the garage door opener
like an ordinary remote control.
- It transmits Skylink
®
rolling code.
- Multiple buttons allow operation of multiple garage
door openers and lighting / appliances control.
Audio Sensor – Model AS-101
- The Audio Sensor is to be used in conjunction with
the Skylink
®
garage door closer and any CO detector
(sold separately). It is used to detect the CO emission
inside the garage.
- When the CO level exceeds the safety limit, the alarm
from the CO detector will sound, which will trigger
Skylink’s Audio Sensor. Skylink
®
wall console will
open the garage door for 10 minutes to improve air
circulation. The door will then be closed automatically
after the CO level resumes within the safety limit.
3. OPERATION (CONT)
–
4
–
Red LED above lock button
Full Function Mode
ON
Simple Mode
OFF
Note: While pressing both buttons together to check the operating
mode, you may change the lock status. Please refer to section “Lock
Button” to ensure you don’t lock the GC-433R or your garage door
opener while checking the operating mode.
If your garage door opener is in Full Function Mode, i.e. Chamberlain
®
,
LiftMaster
®
, Sears
®
, you can use both the lock button and light button
on the GC-433R to operate the lock function and light function on your
garage door opener.
If your garage door opener is in Simple Mode, the lock and light buttons
cannot be used to operate the lock and light functions on your garage
door opener. You need to use the buttons on the original Multi-
Functional Wall Console to execute these functions.
To identify if your GC-433R has selected the proper brand, press both
the lock and light buttons on your GC-433R (for less than 3 seconds)
and observe the red LED above the lock button.
Garage Door Opener Operating Mode
The operation for different brands of openers is slightly different, so
while the GC-433R is charging, it also identifies the brand of your
garage door opener. Mainly there are 2 operating modes:
Full Function Mode: Chamberlain
®
, LiftMaster
®
, Sears
®
with Multi-Function
Wall Console
Simple Mode: Other brands
