01/04/2020
11/20
E_MH_Mounting_instructions_Skylux_Cintralux_Alu_25mm_fixed_parts_flat_curb
3. Bracket
Place the
bracket for flat curb 46577 on lateral profile LP125 and screw it tight in the pre-drilled holes with the
two screws supplied (Ø 6.5 x 50 mm with neoprene seal 36187).
Important: at the location of the filler panels, the distance between the brackets will be less (than where full sheet
widths are to come).
4. Bottom arch
Place the pre-bent
bottom arch LP525 at the location of bracket 46577 and tighten using the bolts supplied M8
x 60 mm. Each bottom arch LP525 is fixed like this to the two ends of both lateral profiles LP125 by means of
brackets 46577.
Screw
Ø 6,5 x 50 mm
46577
Bracket for flat curb
Screw
Ø 6,5 x 50 mm
46577
onderbeugel
Bracket for flat curb
LP525
Bottom arch
Bolt
M8 x 60
LP525
Bottom arch
Bolt
M8 x 60
